ENGEL USA

Experience ENGEL’s answer to the challenges of the fourth industrial revolution – inject 4.0 – at the upcoming Plastec West 2018 show. ENGEL will...

ENGEL Global

Professor Georg Steinbichler, Senior Vice President of R&D Technologies at ENGEL AUSTRIA, has been awarded the gold badge of honour by the VÖK...
At the Plast 2018 and the integrated Rubber Show from May 29 to June 1 in Milan, Italy, the injection moulding machine manufacturer ENGEL presents its...
Along with Canada and Mexico, the US is one of the most important sales regions for ENGEL, and South America is also on the rise. – At the NPE2018 in...
ENGEL is continuing to grow. For the fourth time in sequence, the injection moulding machine builder and system solution provider based in...
At NPE2018, which takes place in Orlando/Florida, USA, from May 7th to 11th, ENGEL will present its composite expertise with a special Expert Corner....
Maximum quality, performance and efficiency: the South American packaging industry has high requirements. Thanks to its reliable injection moulding...
ENGEL is set to welcome visitors to the smart factory at Elmia Polymer 2018, Scandinavia’s biggest trade fair for plastics and rubber processing,...
With two challenging applications on a servo-hydraulic and an all-electric injection moulding machine, ENGEL will clearly demonstrate how process...
As of April 1, 2018, Frank Schuster is taking over as the Vice President of the Business Unit Packaging at the injection moulding machine manufacturer...
Which direction is the automotive market in Iran and Central Asia moving in? Which innovative technologies meet the new requirements? And how can the...
Consistent quality, permanent availability, maximum output – it takes more than reliable machines to securely achieve these criteria of success. The...
Electric vehicles are gaining ground in China – bringing with them innovative lightweight construction technologies. At Chinaplas 2018, which takes...
At Chinaplas 2018, which takes place in Shanghai from April 24th to 27th, ENGEL will showcase its expertise in automation at a special Expert Corner....
The ENGEL Deutschland Technologieforum Stuttgart is celebrating its birthday. Five years ago, north-west of Stuttgart the injection moulding machine...
ENGEL's new e-connect customer portal will be launched in North America in time for NPE2018: e-connect will simplify and speed up communication...
“Innovation is key to the future” – this is the motto of Chinaplas 2018 from 24 to 27 April in Shanghai. At its booth, ENGEL will be presenting many...
At the launch in North America, ENGEL will be demonstrating iQ flow control live at NPE2018, from May 7th to 11th in Orlando, Florida. The integrated...
The packaging industry is one of the fastest growing sectors in Southeast Asia, and a key driver of innovation. The pressure on costs is greater in...
Injection moulding machine manufacturer ENGEL has been focusing on in-house professional training for many years. This training is now set for...
With the beginning of the new year, ENGEL ITALIA is initiating the generational change in management. As of January 1, 2018, Dr. Matteo Terragni is...
Highest quality and highest efficiency – at NPE2018 from May 7 to 11 in Orlando, Florida, with multiple, exciting injection molding applications ENGEL...
Uncompromising cleanliness, maximum product safety and economic efficiency: at the med.con medical technology conference, hosted by ENGEL Deutschland...
ENGEL is making its customers more competitive with flexible and efficient machine concepts along with automation from a single source. The system...
Optimum efficiency, maximum performance and consistent quality: ENGEL, the Austrian injection moulding machine manufacturer and system expert, will...
The Fakuma 2017 was a great success for ENGEL. The good investment climate continues, many orders for injection moulding machines, robots and...
ENGEL is bringing its sales and service subsidiaries in Scandinavia and Finland even closer together under joint management, thus continuing to...
e-connect, the new customer portal of ENGEL, is due to be launched at Fakuma 2017. The portal will simplify and speed up communication between...
At Fakuma 2017, which takes place in Friedrichshafen, Germany, from October 17th to 21st, ENGEL will showcase its expertise in automation at a special...
The topic of Industry 4.0 is a main focus of the upcoming International MuCell Conference, from November 21 to 22, at ENGEL in Schwertberg, Austria....
For ENGEL Machinery (Shanghai), 2017 is a special year: Ten years ago, the plant opened and the first large-size machine produced in Shanghai was...
Structural foam moulding is one of the most important lightweight technologies available today and continues strong growth worldwide. The injection...
Low costs per unit and high quality – the packaging industry has particularly high demands and must also adapt flexibly to the various requirements of...
Cyclically determined performance indicators are used to monitor and optimise injection moulding processes. In the past, the focus was on axle...
Experience the smart factory – this is ENGEL's focus at the Interplas 2017, from September 26 to September 28 in Birmingham, United Kingdom. At its...
Integrated processes require integrated solutions. Therefore, ENGEL AUSTRIA supplies tailor-made manufacturing cells for FRP lightweight structures...
At the Fakuma 2017 from October 17 - October 21 in Friedrichshafen, Germany, ENGEL will be opening up new horizons for the injection moulding...
Joachim Kragl, head of application technology at ENGEL Machinery Inc. in the USA, has been awarded the Ernst Schmitz prize for 2017 by the GFKT...
The list of attendees at the ENGEL trend.scaut 2017 reads like a who’s who of the international automobile industry. More than 500 development and...
In 2013, injection moulding machine manufacturer ENGEL started training the next generation of skilled professionals at its large-scale machine plant...
ENGEL has been named as one of the most family-friendly companies in Austria. The accolade was awarded to the manufacturer of injection-moulding...
On his three-day tour of South Bohemia, the Czech President Miloš Zeman and a group of delegates and members of the press visited the ENGEL production...
Together with over 200 guests, ENGEL opened its much extended and modernised subsidiary in Hannover on 9 and 10 May. The Austrian global market leader...
The ENGEL Group, headquartered in Schwertberg, Austria, has appointed Markus Richter as chief financial officer with effect from May 1st, 2017. He...
With inject 4.0., ENGEL is supporting the injection moulding industry worldwide in taking full advantage of the opportunities presented by the fourth...